Rinnai M060SN Solo 60,000 BTU Condensing Wall Mounted Heat Only Boiler (Natural Gas)
$1,544.39
The Rinnai M060SN is a wall-mounted condensing boiler that uses natural gas to provide heating. It has a maximum heating input capacity of sixty thousand BTUs.
Product Description
The Rinnai M060SN is a wall-mounted condensing boiler that uses natural gas to provide heating. It has a maximum heating input capacity of sixty thousand BTUs. This boiler is suitable for whole-house heating and can be retrofitted into existing systems.
- Wall-mounted for space-saving installation
- Includes an LP field conversion kit, flue adapters, and an outdoor reset sensor
- High efficiency with direct venting options
Product Highlights
This unit is designed for efficiency and effective heating with modulating pump technology for consistent temperature control. It meets high standards for performance, making it a reliable choice for residential applications.
Product Information
Standard Information
- Mounting Type: Wall
- Brand: Rinnai
Technical Specifications
- Weight: 75 pounds
- BTU (Max): 60000
- BTU (Min): 17000
- Fuel Type: Natural Gas
- Vent Type: Direct Vent
- Height: 12 inches
- Shipping Dimensions: 31.5 inches (Depth) x 23 inches (Width) x 12 inches (Height)
| Weight | 75 lbs |
|---|
Delivery Times
Once your order ships, here's roughly what to expect:
Delivery times can vary based on your location and carrier conditions. Remote areas or weather delays may add a day or two.
Related products
Rinnai IP090199C i-Series Plus 90,000 BTU Condensing Combi Boiler, 95% AFUE
The RINNAI ip090199c is a condensing gas combination boiler from the I-Series Plus line, designed for residential heating applications that require simultaneous space heating and domestic hot water delivery. Rated at 95% AFUE, this combi boiler delivers high efficiency performance across a wide output range from 90,000 to 199,000 BTU/h.
Rinnai RE199e High Efficiency Non-Condensing Tankless Hot Water Heater Outdoor
The Rinnai RE199e High Efficiency Non-Condensing Tankless Hot Water Heater is designed for outdoor installation, delivering a flow rate of up to 9.8 gallons per minute. This unit is perfect for homes with three or more bathrooms, ensuring multiple fixtures can run simultaneously without running out of hot water.
Rinnai TRS02ILCXIN commercial freestanding rack system
The Rinnai TRS02ILCXIN Commercial Freestanding Rack System is designed for indoor installation, providing built-in redundancy for tankless water heaters to ensure a continuous hot water supply. Operating with Natural Gas, this system boasts a 0.98 Uniform Energy Factor (UEF) and a 26:1 turndown ratio, offering high efficiency for commercial applications.
You were not leaving your cart just like that, right?
Enter your details below to save your shopping cart for later. And, who knows, maybe we will even send you a sweet discount code :)